Fin alignment tool

If you have ever wondered why you have kept up with another boat on one tack, but it climbed away from you on the other, then you need to check the fore and aft alignment of your fin. Even professionally built boats can have minor mis-alignment that is well worth rectifying (assuming the fin is removable from the hull).  

Kit of parts requiring assembly and addition of two x 400-500 mm lengths of 11 mm diameter mast tube plus light line and miniature plumb bobs. 15 or 25 kgs Dyneema, bowsies and some 1.5 mm diameter wires are quite suitable for the plumb lines. 

The illustration shows the basic format of the tool but no detail.

Designed to make checking the fore and aft alignment of a fin a simple matter. Instructions for use provided.

For fins with a chord length at mid depth of 50 to 100 mm. 

Larger version for 6M and A Class and others with large chord fins under development.