Hook - laser cut - small

Quick Overview

Hook - laser cut - medium. Laser cut from 1.4 mm stainless steel sheet, 15 mm x 7 mm.

Product code. 087G

Availability: In stock

£1.30

Hook - laser cut - small

More Views

Details

Hook - laser cut - medium. Laser cut from 1.4 mm stainless steel sheet, 15 mm x 7 mm. Each.

The hole is de-burred to avoid wear on the line and the hook is then tumbled to smooth the cut edges.

Use where a top quality hook for large loads is required on 36/600, 36R, US 1M, IOM, M, 10R & 6M class boats. 1.0 to 2.0 mm diameter drills are available in packs of 10 - ref. DRILLS.

Attach both the forestay and topping lift to the same eye to make it easier for the headsail to goosewing properly. Using a short length of line between the hook and a ring, ref. 046B, to which the forestay and topping lift are attached allows the headsail to goosewing even easier.

A simple and secure way to add a hook to a line is to pass the end of the line through the eye and make an overhand knot. Reduce the size of the loop formed before tightening and locking with a spot of cyanocrylate glue. Alternatively use a bowline.

Doubtful about the suitability of this product? See downloadable document: Rigging Guide

© 2019 SAILSetc Ltd