IOM A rig kit

Quick Overview

Pack contains spars, rigging and fittings sufficient to make one A rig . Full Overview bottom of page.


5% discount when ordered with a B and C rig kit.


Product code. IOM-RIGKIT-A

Availability: In stock

£92.00
+£20.50

Maximum number of characters: 2

+£10.50

Maximum number of characters: 3

Maximum number of characters: 50

* Required Fields

£92.00

IOM A rig kit

More Views

Details

The standard rig pack contents.

Pack contains spars, rigging and fittings sufficient to make one A rig with the following features:

General features:

•    comprehensive plan and step by step instructions
•    anodised mast material - 7075 T6 grade - natural (silver) or black
•    mast or no mast as chosen
•    anodised, stainless steel and/or nickel plated fittings as appropriate
•    headsail boom counterbalance weight
•    gooseneck/kickingstrap unit is simple to fit to mast
•    faired, clip on spreaders 
•    flexible 7 strand rigging wire for standing rigging
•    Dyneema rigging cord for running rigging
•    self locking rigging screws, fastenings and terminations

The better boat suppliers provide rigging plans specific to their designs. Always use the dimensions in those in preference to the dimensions given in our rig plans. Then the rig tuning instructions given by the boat's designer will be relevant to the rigs you have built.

If you require the kicking strap to be extended so that it is easier to operate on boats where the gooseneck is sunk low in the boat, please choose the 'kicking strap extended' option.

Consider having the mast cut into two pieces and supplied with a joint piece to reduce the cost of packing and carriage significantly. Alternatively, consider having additional mast tubes sent for the same packing and carriage charge for use as spares or for friends.

You will need the following materials to supplement the pack; cyano glue, tape for limit  marks (measurement bands).

DRILL BLOCKS

Make completion of rig and boom kits easier by using the drill blocks (to aid drilling holes in the correct place and attitude) and boom fitting assembly block (to add fittings at correct attitude). See DB-BOOM, DB-MAST-110 and BFAB.

 

© 2019 SAILSetc Ltd