Ball joint connector - simple
Details
Ball joint connector - simple. A length of right hand M3 stainless steel studding and the ball joint with a M2 screw and nut for attachment.
Either bond the studding into the servo tiller connector tube (3.0 mm minimum internal diameter) and use the limited adjustment provided by turning the ball joint connector on the studding or bond the ball joint connector itself directly into a 5.6 mm ID tube.
See product ref. 066 for details of a more sophisticated system. Product 66 has a pair of left hand and right hand threaded ends that provide a more effective way of adjusting the length of the servo to tiller arm connector.