ROGUE - lines plan
Details
ROGUE - lines plan. 2009. 1.2 ± 0.1 kg - VPP.
Round bilge hull for conventional rig or swing rig. Building shadows are shown for 2 mm thick balsa planks but ideally it would be moulded in a two part mould split port and starboard. The plan shows the position of rc, mast, foils and ballast but there are no construction details. SAILSetc has a range of fittings and other equipment aimed directly at boats as small as this class (rigging screw 30-020 for example).
If you are unfamiliar with the construction of a 65 Class boat and do not have sufficient information provided by a lines plan only, then a construction plan from this or another class will provide a lot of the information you need.
Yacht Design Notes - log of SAILSetc designs over the years and a brief description of each.