Hook - laser cut - micro
Details
Hook - laser cut - micro
Laser cut from 1.2 mm stainless steel sheet, 6 mm x 4 mm.
The special design of this item means a secure connection can be made between two pieces of rigging that is resistant to being shaken apart. Perfect for making semi-permanent connections between pieces of rigging. For making the link perfectly secure use 20 mm of silicone rubber tubing to cover the hooks. SAILSetc item, ref. 58-004 is perfect for this task.
Use where a top quality micro hook for large loads is required on 36/600, 36R, US 1M, IOM, M, 10R & 6M class boats.
The attachment hole for the line is too small for efficient de-burring but, if necessary can be deburred using a 1.4 mm Ø drill. 1.0 to 2.0 mm Ø drills are available in packs of 10 - ref. DRILLS.
A simple and secure way to add a hook to a line is to pass the end of the line through the eye and make an overhand knot. Reduce the size of the loop formed before tightening and locking with a spot of cyanocrylate glue. Alternatively use a bowline.
Doubtful about the suitability of this product? See downloadable document: Rigging Guide