IOM A, B and C rig kits
Details
For A, B and C rigs. Pack contains spars, rigging and fittings sufficient to make three rigs with the following features:
General features:
• comprehensive plan and step by step instructions
• anodised mast material - 11 mm round is 7075 T6 grade - natural (silver) or black
• anodised SAILSetc boom material
• mast or no mast as chosen
• anodised, stainless steel and/or nickel plated fittings as appropriate
• headsail boom counterbalance weight
• gooseneck/kickingstrap unit is simple to fit to mast
• flexible 7 strand rigging wire for standing rigging
• faired, clip on, spreaders (except for C rig)
• Dyneema rigging cord for running rigging
• fastenings and terminations
The better boat suppliers provide rigging plans specific to their designs. Always use the dimensions in those in preference to the dimensions given in our rig plans. Then the rig tuning instructions given by the boat's designer will be relevant to the rigs you have built.
If you require the kicking strap to be extended so that it is easier to operate on boats where the gooseneck is sunk low in the boat, please choose the 'kicking strap extended' option.
You will need the following materials to supplement the pack; cyano glue, tape for limit marks (measurement bands)
DRILL BLOCKS
Make completion of rig and boom kits easier by using the drill blocks (to aid drilling holes in the correct place and attitude) and boom fitting assembly block (to add fittings at correct attitude). See DB-BOOM, DB-MAST-110 and BFAB.