Eyebolt - 20 mm x M3
Details
Eyebolt - 20 mm x M3. Nickel plated brass eyebolt. Used to form an attachment point on a deck. The hole is 1.6 mm diameter.
The edges of the hole in this product are well radiussed so that lines will not be abraded when they pass through the hole. Nevertheless this eyebolt is not designed to have sheet lines passing through it as the friction load will be too great and the line will become abraded. Sheet lines should run through fittings designed specifically for that purpose e.g. blocks (61-013, 61-010, 61-008, 62-010) and fairleads (52C, 52-006, 52-003, 53). Beware of lookalike alternative eyebolts from other sources that have sharp internal edges.
As used for one end of rigging screws 030-030, 030-030-SL and 031S.