Head fitting - 11 mm

Quick Overview

Head fitting - 11 mm. For 11 mm dia round mast tubes and 11.1 mm alloy GROOVY mast section. Suitable for use with 36R, IOM and similar size boats.


Can be supplied fitted with a lower bearing and the wire for the sail head.


Also used as the aft end fitting for a headsail boom made of 11 diam round alloy tube. Insert into the boom end with the tab uppermost and use to attach the topping lift.

Product code. 023-110

Availability: In stock

£1.35
£1.35

Head fitting - 11 mm

More Views

Details

Head fitting - 11 mm. For 11 mm dia round mast tubes and 11.1 mm alloy GROOVY mast section. Suitable for use with 36R, IOM and similar size boats.

Also used as the aft end fitting for a headsail boom made of 11 diam round alloy tube. Insert into the boom end with the tab uppermost and use to attach the topping lift.

Now much copied this is the original mast head fitting that is a push fit into the top of a mast. The design incorporates the upper limit mark, a hole for the mainsail head swivel and attachment for the backstay crane.

Use backstay cranes ref. 22-040 or 22-025 (22-025 for No 3 rig only). Use 1.5 mm dia wire for the mainsail head swivel ref. W150.

The grey colour meets the rule requirement for the limit marks to contrast with the colour of the spar.

The special lug provides attachment for SAILSetc wind indicator ref. 100. Drill a 1.6 mm diameter hole in the mast and use an O ring, ref. 82-010, to secure the wind indicator.

© 2019 SAILSetc Ltd